Pressure sensors special for submersible measurement, accuracy 0.25% and 0.5% standard signal: 4...20 mA; 2-wire system or 0...20 mA; 3-wire system

The pressure sensor special for submersible measurement has been developed especially for use in liquids for hydrostatic level measurement.

Due to the systematic use of stainless steel for the wetted parts, this sensor is suitable for the food industry without any restrictions. For measuring tasks in aggressive media a special version with PTFE cable can be obtained.

A hermetically sealed stainless steel case with a protection type IP 68 allows the pressure sensor to be immersed down to a depth of 300 m.

The inner vented connection cable makes pressure compensation of the measuring cell against the atmosphere possible and thus hydrostatic pressure measurement.

The mechanical fastening of the pressure sensor does not require any additional strain relief, as the construction of the cable is suitable to take a maximum tensile force of 1000 N. An additional weight can be screw-fitted to increase the actual weight of the sensor.

For mains-independent service in the field, the sensor can operate with a supply voltage of 6V.

The sensor can be obtained with a lightning protection.To determine the media temperature the submersible sensor can be equiped with a PT 100 sensor.

The pressure sensor special for submersible measurment meets the electromagnetic compatibility (EMC) requirements to EN 61326.